215184
469
Revision A
Adjusting Header Raise Rate
–
New Holland CR/CX Series
If necessary, the header raise rate (the first speed on the HEADER HEIGHT rocker switch of the multifunctional handle) can
be adjusted.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the combine
operator
’
s manual for updates.
NOTE:
For New Holland CR models 6.80, 6.90, 7.90, 8.90, 9.90, and 10.90, refer to
1003628
Figure 9.364: New Holland Combine Display
1.
Select HEADER RAISE RATE on the combine display.
2.
Use the + or
–
buttons to change the setting.
3.
Press ENTER to save the new setting.
NOTE:
The raise rate can be changed from 32
–
236 in steps of 34.
The factory setting is 100.
Setting the Header Lower Rate
–
New Holland CR/CX Series
If necessary, the header lower rate (the automatic header height control button or second speed on the header height
rocker switch of the multifunction handle) can be adjusted.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the combine
operator
’
s manual for updates.
NOTE:
For New Holland CR models 6.80, 6.90, 7.90, 8.90, 9.90, and 10.90, refer to
