215184
293
Revision A
1020157
1020157
Figure 8.59: FM100 Grease Point Decal
1001335
Figure 8.60: Single-Knife Header Grease Point Decal
1001333
Figure 8.61: Double-Knife Header Grease Point Decal
2.
Wipe grease fitting with a clean cloth before greasing to
avoid injecting dirt and grit.
IMPORTANT:
Use clean, high-temperature, extreme-pressure grease only.
3.
Inject grease through fitting with grease gun until grease
overflows fitting (except where noted).
4.
Leave excess grease on fitting to keep out dirt.
5.
Replace any loose or broken fittings immediately.
6.
Remove and thoroughly clean any fitting that will not take
grease. Also clean lubricant passageway. Replace fitting if
necessary.