215184
88
Revision A
1008989
A
Figure 3.171: Reel Disc Sectors
10. Remove reel disc sectors (A) from right end reel
support arm.
3.3.2
Removing Shipping Stands and Supports
Unless otherwise specified, discard stands, shipping material, and hardware. The removable stands are painted yellow.
IMPORTANT:
If the header is being shipped to a Dealer after assembly, do
NOT
remove the shipping stands, guards, and fork slider
channels at this time. Proceed to Step
Removing shipping stands from the float module
1019679
A
C
D
E
B
Figure 3.172: Shipping Stands and Lower Brace
1.
Remove two bolts (A) securing right fork channel (B) to
shipping stand (C).
NOTE:
To access the bolts at the lower stand support, the header
must be supported with 150 mm (6 in.) blocks, as directed
in Step
2.
Remove two bolts (D) securing right fork channel (B) to
lower brace (E).
3.
Repeat the steps above for the left side.