215184
237
Revision A
1008185
A
B
Figure 7.75: Secured Switch
–
S6 and T6 Series
Combines
21.
S6 and T6 Series combines only:
Close cover and ensure
that rocker switch (A) and rocker switch support (B) are
secure.
1027117
A
B
C
Figure 7.76: Side View of Seat with Supports Installed
in Preferred Location
22. Remove two M6 countersunk head screws (C) securing
track (B) to the side of the seat, then remove the track.
Install tilt/draper speed support (A) between track (B) and
the side of the seat using the M6 screws (C).
NOTE:
If other options are not being installed on the track, refer to
the alternative installation location instructions below. The
preferred installation location provides better access to the
cup holders.
1027119
B
A
Figure 7.77: Top View of Armrest Showing Supports
Installed in Preferred Location
A - Tilt/Draper Speed Support
B - Rocker Switch Support
NOTE:
The rocker switch is not shown in the illustration at right.