215184
208
Revision A
1001492
B
A
Figure 7.7: Combine Receptacle
10. Push handle (A) on the combine to the fully-open position.
11. Clean the mating surfaces of multicoupler (B) and
receptacle if necessary.
1001493
B
A
C
D
Figure 7.8: Multicoupler
12. Position multicoupler (A) onto the combine receptacle, and
pull handle (B) to fully engage the multicoupler into the
receptacle.
13. Connect reel fore-aft/header tilt selector harness (C) to
combine harness (D).
1024057
A
B
C
D
Figure 7.9: Driveline
14. Detach safety chain (C) from support bracket (B).
15. Pull collar (D) back to release driveline (A) from support
bracket. Remove the driveline from support bracket.