![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658497.webp)
215184
473
Revision A
1013274
A
Figure 9.370: Float Lock
2.
Check that float lock linkage is on down stops (washer [A]
cannot be moved) at both locations.
NOTE:
If the header is not on down stops during the next two
steps, the voltage may go out of range during operation
causing a malfunction of the auto header height control
(AHHC) system.
1015833
A
B
Figure 9.371: Float Indicator Box
3.
Adjust cable take-up bracket (B) (if necessary) until float
indicator pointer (A) is on
0
.
4.
Ensure header float is unlocked.