215184
6
Revision A
1009102
A
B
Figure 2.2: Pull Strap Location
1.
Move trailer into position and block wheels.
2.
Lower trailer storage stands.
3.
Open the container doors and remove the materials that
brace the load.
4.
Check the container floor. Remove nails and other
obstructions if necessary.
5.
Position lifting platform (A) at container opening with lifting
vehicle.
6.
Attach chain from pull strap (B) on the header to forks on a
second vehicle.
NOTE:
If pull strap is not attached, attach chain to outboard
shipping supports.
7.
Pull headers from container onto platform.
8.
Lift platform slightly to take weight off container.
9.
Drive the truck and container forward slowly until the container is clear from the headers. Watch all clearances and
reposition the headers as required.
10. When the container is clear of headers, lower platform and headers to ground.