![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658164.webp)
215184
140
Revision A
3.6
Installing Guards
–
Single Reel
Double-Reel Headers:
Proceed to
4 Loading Header for Transport to Dealership, page 143
1014357
A
B
Figure 3.299: Knife Hold-Downs
Single-Reel Headers:
Choose between the following procedures
for installing cutterbar components at the center shipping beam
location, depending on whether the header has formed hold-
downs (A) or forged hold-downs (B).
3.6.1
Installing Formed Hold-Down Clips
1014358
A
B
Figure 3.300: Cutterbar Wearplate
1.
If equipped, position cutterbar wearplate (A) on the
cutterbar and install with two 7/16 in. x 1-1/2 in. long
carriage bolts (B).