Section
Summary of Change
Internal Use
Only
8.10 Checking and Adjusting Skid
Shoe Settings, page 276
•
Step
to Step
•
Step
to Step
Added safety steps.
Tech Pubs
8.11.2 Adjusting Reel Clearance,
page 279
•
Step
•
Step
Added safety steps.
Tech Pubs
8.11.2 Adjusting Reel Clearance,
page 279
•
Step
Added NOTE.
Tech Pubs
8.11.2 Adjusting Reel Clearance,
page 279
•
Step
Added safety step.
Tech Pubs
8.13 Adjusting Draper Tension,
page 284
Changed the following WARNING to a DANGER:
•
To avoid bodily injury or death from unexpected start-up or
fall of raised machine, always stop engine, remove key, and
engage safety props before going under machine for any
reason.
Tech Pubs
8.15 Checking and Adjusting
Draper Seal, page 287
Revised the IMPORTANT to clarify that the gap (deck seal) on new
drapers needs to be set to 1
–
3 mm (1/16
–
1/8 in.). Removed
information about the break-in period because this does not
apply to an unloading and assembly manual.
Tech Pubs
8.15 Checking and Adjusting
Draper Seal, page 287
•
Step
Revised associated picture to identify gap dimension.
Tech Pubs
8.15 Checking and Adjusting
Draper Seal, page 287
•
Step
Added step.
Tech Pubs
8.15 Checking and Adjusting
Draper Seal, page 287
•
Step
Added information regarding header width and the quantity of
deck supports to the NOTE.
Product Support
8.15 Checking and Adjusting
Draper Seal, page 287
•
Step
•
Step
•
Step
•
Step
Added steps and associated pictures.
Tech Pubs
215184
x
Revision A