215184
520
Revision A
ü
ü
Item
Reference
Check reel rotating in correct direction.
—
Check knife drive pulley(s) is rotating in proper direction.
Clockwise on left side; Counterclockwise on right side (double
knife only).
Step
Check knife speed.
Step
Check draper tracking.
11.1.1 Adjusting Draper Tracking, page 496
Check deck shift. Draper should stop turning during deck
movement, and start again in the opposite direction after
shift is complete.
—
Check lights are functional.
—
Check reel lift cylinders extend fully.
—
Check reel moves fully fore and aft.
—
Post run-up check
11.1 Performing Post Run-Up Adjustments, page 495
Check knife and reel drives for heated bearings.
—
Check knife sections for discoloration caused by misalignment
of components.
11.1.2 Adjusting Knife, page 498
Check for hot spots on the cutterbar above the draper seal.
Adjust deck height as required.
—
Check for hydraulic leaks.
—
Check that manual storage case contains operator
’
s manual
and parts catalogs.
8.19 Checking Manuals, page 303
Date Checked:
Checked by: