215184
410
Revision A
1018433
A
Figure 9.230: Header Offset Settings
4.
Header Offsets (A):
Offset distances are important for yield
mapping. There are two adjustable dimensions on the
HEADER SETTINGS page:
•
Header Lateral Offset: the distance between the
centerline of the header and the centerline of the
machine. This should be set at
0
for a MacDon header.
•
Feeder House to Cutter: the distance from the machine
interface to the cutterbar. This should be set at
68
for a
MacDon header.
Figure 9.231: MacDon Header Settings Inputs
1018472
