215184
449
Revision A
1023890
Figure 9.320: John Deere Combine Display
8.
Press and hold REEL RAISE switch until reel is fully raised.
Continue holding REEL RAISE switch until prompted by the
display.
1023892
A
Figure 9.321: John Deere Combine Display
9.
When all steps have been completed, CALIBRATION
COMPLETE message is displayed on the screen. Exit the
CALIBRATION menu by pressing ENTER icon (A).
NOTE:
If an error code appears during calibration, the sensor is out
of voltage range and will require adjustment. For
instructions, refer to
Checking Reel Height Sensor Voltages