215184
380
Revision A
1003741
A
Figure 9.169: CLAAS Combine Display, Console, and
Control Handle
4.
Use control knob (A) to raise or lower the reel speed.
NOTE:
This option is only available at full throttle.
Calibrating Reel Height Sensor
–
CLAAS 600 and 700 Series
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the combine
operator
’
s manual for updates.
To calibrate reel height, follow these steps:
1.
Place header off the ground 15
–
25 cm (6
–
10 in.).
IMPORTANT:
Do
NOT
turn off the engine. The combine has to be at full idle for the sensors to calibrate properly.
1003686
A
B
Figure 9.170: CLAAS Combine Display, Console, and
Control Handle
2.
Use control knob (A) to highlight FRONT ATTACHMENT
icon (B) and press control knob (A) to select it.