![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658160.webp)
215184
136
Revision A
3.5
Installing Reel Endshields
Endshields are installed at the reel outboard disc locations on single- and double-reel headers.
1008331
Figure 3.287: Hardware Bag E
1.
Retrieve hardware bag E previously removed from
cutterbar.
2.
For non-split-frame headers:
retrieve endshield segments
that are strapped to reel tube.
3.
For split-frame headers:
retrieve endshield segments that
are strapped to center draper track.
1010408
B
A
C
D
Figure 3.288: First Segment and Endshield Support
NOTE:
The endshields are preassembled, except for one segment,
to allow installation onto the outboard end disc.
4.
Engage endshield support tabs (A) into slots (B) on first
segment, and secure with 3/8 x 3/4 in. long Torx
®
bolt (C)
and smooth face lock nut (D). Do
NOT
tighten.
1010415
Figure 3.289: Second Segment Position
5.
Engage tabs of second endshield support into slots at
opposite end of first segment.
6.
Position second segment in front of first segment, engage
endshield support tabs through both segments, and secure
with 3/8 x 3/4 in. long Torx
®
bolt and smooth face lock nut.
Do
NOT
tighten.