215184
479
Revision A
•
The header is attached to the combine.
•
The combine is on level ground, with the header level to the ground.
•
The header is on down stops, and the center-link is set to
D
.
•
The engine is running.
•
The combine is not moving.
•
No faults have been received from the header height controller (HHC) module.
•
Header/feeder is disengaged.
•
Lateral float buttons are
NOT
pressed.
•
ESC key is
NOT
pressed.
To calibrate the AHHC, follow these steps:
1016108
A
Figure 9.385: New Holland Combine Display
1.
Select CALIBRATIONS (A) on the main screen. The
CALIBRATION screen displays.
1016107
A
Figure 9.386: New Holland Combine Display
2.
Select CALIBRATION drop-down arrow (A).