Lenovo HX3510-G Installation And Service Manual Download Page 68 | Manualshive

Page: 68 / 1240

background image

– Intelligent Platform Management Protocol (IPMI) version 2.0

– Simple Network Management Protocol (SNMP) version 3.0; SNMP Trap version 1.0

– Common Information Model (CIM)

– Web browser

For more information about the IMM2, see “Using the integrated management module” on page
40, Appendix A “Integrated management module II (IMM2) error messages” on page 229, and
the

Integrated Management Module II User's Guide

at http://publib.boulder.ibm.com/infocenter/

systemx/documentation/topic/ com.lenovo.sysx.imm2.doc/ printable_doc.html.

•

Dynamic System Analysis

DSA Preboot diagnostic program is stored in the integrated USB memory on the server. DSA Preboot
collects and analyzes system information to aid in diagnosing server problems, as well as offering a
rich set of diagnostic tests of the major components of the server. DSA Preboot collects the following
information about the server:

– Drive health information

– IMM2 configuration information

– IMM2 environmental information

– Event logs for ServeRAID controllers and service processors

– Installed hardware, including PCI and USB information

– LCD system information display panel (if available) status

– Microprocessor, input/output hub, and UEFI error logs

– Network interfaces and settings

– Option card driver and firmware information

– RAID controller configuration

– Service processor (integrated management module) status and configuration

– System configuration

– Vital product data, firmware, and UEFI configuration

DSA Preboot also provides diagnostics for the following system components (when they are installed):

1. IMM I2C bus

2. LCD system information display panel (available on some models)

3. Memory modules

4. Microprocessors

5. SAS or SATA drives

6. LSI Controller

7. Broadcom network adapter

8. FusionIO storage

9. Intel GPU

10. Nvidia GPU

See “Running the DSA Preboot diagnostic programs” on page 62 for more information on running the
DSA Preboot program on the server.

•

Troubleshooting by symptom

These tables list problem symptoms and actions to correct the problems. See “Troubleshooting by
symptom” on page 64 for more information.

56

HX3510-G, HX5510, HX5510-C, HX7510 Installation and Service Guide

«
...
66
67
68
69
70
...
»

Summary of Contents for HX3510-G

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for HX3510-G

Brand: IBM Pages: 40

LS42 - BladeCenter - 7902

Brand: IBM Pages: 194

SUPERSERVER 5018D-MHR7N4P

Brand: Supermicro Pages: 126

SUPERO SuperServer 6026TT-H6IBQRF

Brand: Supero Pages: 110

System x3650 M4 BD Type 5466

Brand: IBM Pages: 786

Brand: MSI Pages: 18

Brand: Moxa Technologies Pages: 100

Brand: Opengear Pages: 4

Brand: Infrant Technologies Pages: 98

Brand: Asus Pages: 82

Brand: Asus Pages: 32

Brand: Asus Pages: 42

RS100-E5 - 0 MB RAM

Brand: Asus Pages: 148

PIKE II 3008 Series

Brand: Asus Pages: 80

Brand: Asus Pages: 44

Brand: Asus Pages: 56

Brand: Asus Pages: 40

Brand: Asus Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands