•
816f0a13-0301ffff : System [ComputerSystemElementName] has recovered from a Fatal Bus
Error. (CPU 1 PECI)
This message is for the use case when an implementation has detected that a system has recovered
from a Bus Fatal Error.
May also be shown as 816f0a130301ffff or 0x816f0a130301ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix:
PLAT
ID:
0245
User Response
1. (Trained technician only) Replace microprocessor n (see Removing a microprocessor and heat
sink and Replacing a microprocessor and heat sink).
2. If the problem persists and there is no other CPU with the same error indication, replace the
system board.
3. (Trained technician only) Replace the system board (see Removing the system board and
Replacing the system board). (n = microprocessor number)
•
816f0a13-0302ffff : System [ComputerSystemElementName] has recovered from a Fatal Bus
Error. (CPU 2 PECI)
This message is for the use case when an implementation has detected that a system has recovered
from a Bus Fatal Error.
May also be shown as 816f0a130302ffff or 0x816f0a130302ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Other
Appendix A. Integrated management module II (IMM2) error messages
1025
Summary of Contents for HX3510-G
