Model 2450 Interactive SourceMeter® Instrument Reference Manual
Section 3: Functions and features
2450-901-01 Rev. B/September 2013
3-25
4. Select the
Fill Mode
button. The Fill Mode menu is displayed.
Figure 78: Fill Mode menu
5. Select the Fill Mode. For example, select
Continuous
. The Settings for testData menu is
displayed, indicating that the Fill Mode is Continuous.
Figure 79: Settings for testData menu
6. Press the
HOME
key to return to the
HOME
screen.
Using SCPI commands to set the buffer fill mode:
To set the
testData
reading buffer fill mode to continuous, send the following command:
TRACe:FILL:MODE CONT, "testData"
To set the
defbuffer1
reading buffer fill mode to fill once, send the following command:
TRACe:FILL:MODE ONCE, "defbuffer1"
Using SCPI commands to set buffer capacity:
To set the
testData
reading buffer to hold 300 readings, send the following command:
TRACe:POINts 300, "testData"