![background image](http://html2.mh-extra.com/html/keithley/interactive-sourcemeter-2450/interactive-sourcemeter-2450_reference-manual_4033478709.webp)
Section 8: TSP command reference
Model 2450 Interactive SourceMeter® Instrument Reference Manual
8-178
2450-901-01 Rev. B/September 2013
Example
trigger.lanin[1].edge = trigger.EDGE_FALLING
Set the edge state of LAN event 1 to
falling.
Also see
(on page 3-62)
TSP-Link system expansion interface
(on page 3-118)
trigger.lanin[N].overrun
This attribute contains the overrun status of the event detector.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
LAN trigger
N
clear
LAN trigger
N
reset
Not applicable
Not applicable
Usage
overrun
= trigger.lanin[
N
].overrun
overrun
The trigger overrun state for the specified LAN packet (
true
or
false
)
N
The LAN event number (1 to 8)
Details
This attribute indicates whether an event has been ignored because the event detector was already in the
detected state when the event occurred.
This is an indication of the state of the event detector built into the synchronization line itself. It does not indicate
if an overrun occurred in any other part of the trigger model, or in any other construct that is monitoring the event.
It also is not an indication of an output trigger overrun.
Example
overrun = trigger.lanin[5].overrun
print(overrun)
Checks the overrun status of a trigger on LAN5 and
outputs the value, such as:
false
Also see
(on page 8-177)
(on page 8-179)
(on page 8-179)
(on page 8-184)