Model 2450 Interactive SourceMeter® Instrument Reference Manual
Section 6: SCPI command reference
2450-901-01 Rev. B/September 2013
6-145
:TRIGger:BLOCk:NOP
This command creates a placeholder that performs no action in the trigger model.
Type
Affected by
Where saved
Default value
Command only
Recall settings
Instrument reset
Power cycle
Save settings
Not applicable
Usage
TRIGger:BLOCk:NOP <blockNumber>
<blockNumber>
The sequence of the block in the trigger model
Details
If you remove a trigger model block, you can use this block as a placeholder for the block number so that you do
not need to renumber the other blocks.
Example
TRIG:BLOC:NOP 5
Set block number 5 to be a no operation block.
Also see
None