Model 2450 Interactive SourceMeter® Instrument Reference Manual
Section 6: SCPI command reference
2450-901-01 Rev. B/September 2013
6-63
:SOURce[1]:CONFiguration:LIST:QUERy?
This command returns a list of TSP commands that represent the parameters that are stored in the specified
configuration point.
Type
Affected by
Where saved
Default value
Query only
Not applicable
Not applicable
Not applicable
Usage
:SOURce[1]:CONFiguration:LIST:QUERy? <name>, <point>
<name>
A string that represents the name of a source configuration list
<point>
A specific configuration point in the configuration list
Details
This command can only return data for one configuration point. To get data for additional configuration points,
resend the command and specify different configuration points.
Refer to
Instrument settings stored in a source configuration list
(on page 3-38) for a complete list of source
settings that the instrument stores in a source configuration list.
Example
:SOUR:CONF:LIST:QUER? "MySourceList", 2
Returns the TSP commands that represent the settings in configuration point 2.
Also see
(on page 3-33)
:SOURce[1]:CONFiguration:LIST:CREate
(on page 6-61)
Instrument settings stored in a source configuration list
(on page 3-38)
:SOURce[1]:CONFiguration:LIST:RECall
This command recalls a specific configuration point in a specific source configuration list.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:SOURce[1]:CONFiguration:LIST:RECall <name>, <point>
<name>
A string that represents the name of a source configuration list
<point>
A specific configuration point in the configuration list