Section 2: General operation
Model 2450 Interactive SourceMeter® Instrument Reference Manual
2-30
2450-901-01 Rev. B/September 2013
Views Sheet menu
This menu allows you to view data in the selected reading buffer.
Setting
Description
Buffer
Select the button next to Buffer to select the buffer you want to
view.
Up and down arrows
Select the up or down arrow to jump up or down one page in the
data displayed on the screen.
Jump
Select Jump to move to a specific row in the data sheet. This is
useful to avoid scrolling through large lists of values.
Refresh
Select Refresh to update the list of values shown in the data sheet.
Data sheet window
Shows the list of readings in the selected buffer. Select a line in the
sheet to see the details of that specific data point. You can scroll
up or down in the data sheet window by swiping in an up or down
motion on the sheet (or using the up and down arrows or Jump
button).
Data Point Details
When you select a line in the sheet, a screen opens that shows a
detailed list of settings that describe the instrument state when that
specific data point was read.
Trigger menu
The menus organized under Trigger in the main menu allow you to configure triggering operations
from the Model 2450 front panel. The following topics describe the settings that are available on
these interactive screens.
Templates menu
The Model 2450 has preprogrammed trigger model templates that you can use from the instrument
front panel. When you select a template, any user-specified settings for that template are visible in
the lower part of the screen.
You can also customize the templates from the front panel using the Configurable menu under
Trigger on the main menu screen. For details, see
(on page 2-32).
The table below describes the trigger model templates and available user-specified settings, and their
default settings.
