![background image](http://html2.mh-extra.com/html/keithley/interactive-sourcemeter-2450/interactive-sourcemeter-2450_reference-manual_4033478613.webp)
Section 8: TSP command reference
Model 2450 Interactive SourceMeter® Instrument Reference Manual
8-82
2450-901-01 Rev. B/September 2013
reset()
This function resets commands to their default settings.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
reset()
reset(
system
)
system
true
: If the node is the master, the entire system is reset
false
: Only the local group is reset
Details
The
reset()
command in its simplest form resets the entire TSP-enabled system, including the controlling node
and all subordinate nodes.
If you want to reset a specific instrument, use the
node[
X
].reset()
command. Also use the
node[
X
].reset()
command to reset an instrument on a subordinate node.
When no value is specified for
system
, the default value is
true
.
You can only reset the entire system using
reset(true)
if the node is the master. If the node is not the master
node, executing this command generates an error.
Example
reset(true)
If the node is the master node, the entire system is
reset; if the node is not the master node, an error is
generated.
Also see
None