Model 2450 Interactive SourceMeter® Instrument Reference Manual
Section 8: TSP command reference
2450-901-01 Rev. B/September 2013
8-205
trigger.model.setblock() — trigger.BLOCK_DELAY_CONSTANT
This command adds a constant delay to the trigger model.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Restore configuration
Instrument reset
Power cycle
Configuration script Not applicable
Usage
trigger.model.setblock(
blockNumber
, trigger.BLOCK_DELAY_CONSTANT,
time
)
blockNumber
The sequence of the block in the trigger model
time
The amount of time to delay in seconds
Details
When the trigger model reaches a delay building block, it stops operation for the amount of time set by the delay.
This delay is a fixed amount of time. If other delays have been set, this delay is in addition to the other delays.
Example
trigger.model.setblock(7, trigger.BLOCK_DELAY_CONSTANT, 30e-3)
Configure trigger block 7 to delay the trigger model before the next block until a delay of 30 ms elapses.
Also see
None