Model 2450 Interactive SourceMeter® Instrument Reference Manual
Section 3: Functions and features
2450-901-01 Rev. B/September 2013
3-13
For additional information about using remote commands for buffer operations, see the following
sections of this manual:
•
(on page 3-27)
•
SCPI commands see
(on page 6-107)
•
TSP command see
(on page 8-7)
Using the front panel to create a user-defined reading buffer:
1. Press the
MENU
key.
2. Under Measure, select
Data Buffers
. The MANAGE MEASURE BUFFERS window is displayed.
Figure 62: MANAGE MEASURE BUFFERS window
3. Select
New
. The keypad is displayed.
4. Enter a name for the buffer you are creating, for example,
testData
.
Figure 63: New Buffer Name
5. Select
Enter
. The Initial Buffer Size window is displayed, showing the default initial buffer size.
Figure 64: Initial Buffer Size window
