Model 2450 Interactive SourceMeter® Instrument Reference Manual
Section 3: Functions and features
2450-901-01 Rev. B/September 2013
3-63
The following figure shows the basic configuration of the digital I/O port. To set a line high
(approxi5 V), write a
1
to it; to set a line low (approximately 0 V), write a
0
to it. To allow an
external device to pull an I/O line low by shorting it to ground, use the open-drain mode; an attached
device must be able to sink at least 50 µA for each I/O line.
Figure 92: Digital I/O port configuration