Model 2450 Interactive SourceMeter® Instrument Reference Manual
Section 6: SCPI command reference
2450-901-01 Rev. B/September 2013
6-143
:TRIGger:BLOCk:LOG:EVENt
This command logs an event during trigger model execution.
Type
Affected by
Where saved
Default value
Command only
Recall settings
Instrument reset
Power cycle
Save settings
Not applicable
Usage
TRIGger:BLOCk:LOG:EVENt <blockNumber>, <eventNumber>, <message>
<blockNumber>
The sequence of the block in the trigger model
<eventNumber>
The event number:
•
INFO<n>
•
WARNing<n>
•
ERRor<n>
Where
<n>
is 1 to 4; you can define up to four of each type
<message>
A string up to 32 characters
Details
This block allows you to log an event in the event log when the trigger model is running. Insert the block into the
trigger model. When the trigger model executes the block, the event is logged.
Note that using this block too often in a trigger model could overflow the event log. It may also take away from
the time needed to process more critical trigger model blocks.
Also see
None