Juniper SRX 5800, Hardware Manual

Page: 175 / 536

Table 39: SRX5800 Services Gateway Power Requirement with 8xSPC3 and 3xIOC3 (continued)
Power Budget at
Ambient
Temperature
(25° C)
Power budget
(with 25° C
config)
Power Budget
(default) Part Number Chassis Component Zone
245 W 275 W 275 W SCB3 with RE2 SCB 1 Zone
0
155 W 185 W 185 W SCB3 SCB 2/Slot 6
614.5 W * 4
=2458 W
615 W * 4
=2460 W
650 W * 4
=2600 W
SPC3 SPC - slots 7 through
10
511 W 511 W 607 W IOC3 IOC - slot 11
320 W 320 W 320 W SRX5800-HC-FAN High-capacity cooling
system (Lower Fan
Tray)
7734 W 7828 W 8396 W Total power allocation
2. SRX5800 with eight SRX5K-SPC3s and three IOC4s. See Table 40 on page 177
NOTE:
•
You must install four high-capacity PEMs with two inputs for each PEM.
•
You must install atleast one IOC4 and four SPC3s in each power zone.
•
You must have the third SCB in Slot 6.
•
SCB4 is not supported.
•
You can install IOC4 in slot 11 only when the ambient temperature is configured to
25° C.
•
Dual Routing Engines is optional.
•
You cannot install SPC3 in slot 11.
•
In chassis cluster if you configured dual control links, then each power zone must have
one control link.
•
You must power-cycle the SRX5800 Services Gateway after the configuration.
176