Juniper SRX 5800, Hardware Manual, Page: 37 / 536

Table 6: Host Subsystem LEDs
Description State Color Label
Host is functioning as the master. On steadily Green MASTER
Host is online and is functioning normally. On steadily Green ONLINE
Host is installed but the Routing Engine is offline. On steadily Red OFFLINE
Host is not installed. Off
SRX5800 Services Gateway Craft Interface Power Supply LEDs
Each power supply has two LEDs on the craft interface that indicate its status. The LEDs, labeled 0 through
3, are located near the middle of the craft interface next to the PEM label. Table 7 on page 38 describes
the functions of the power supply LEDs on the craft interface.
Table 7: Power Supply LEDs on the Craft Interface
Description State Color Label
Power supply is functioning normally. On steadily Green PEM
Power supply has failed or power input has failed. On steadily Red
SRX5800 Services Gateway Craft Interface Card OK/Fail LEDs
Each slot in the card cage has a pair of LEDs on the craft interface that indicates the status of the card
installed in it. The card LEDs are located along the bottom edge of the craft interface and are labeled as
follows:
•
0 through 5 on the left
•
0 and 1 for the two center slots reserved for SCBs
•
2/6 and 7 through 11 on the right
Table 8 on page 39 describes the functions of the OK and Fail LEDs.
38