Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 811 / 1026

Table 101: Log Viewer Columns (continued)
Meaning Default Column
The device action performed on the packet / connection that
generated the log. Default Action
The protocol used by the packet that generated the log.. Default Protocol
The destination port of the packet that generated the log. No Dst Port
The rule in the rulebase in the policy in the specific version of
an object that generated this log entry. Default Rule #
The source address that has undergone NAT, and is
associated with the packet that generated the log entry. Default Nat Src Addr
The destination address that has undergone NAT, and is
associated with the packet that generated the log entry. Default Nat Dst Addr
A string that captures device log data that could not otherwise
be stored in a column. No Details
The type of log you are viewing. Can be expressed either as a
category or a subcategory. A category is either admin, alarm,
config, custom, event, implicit, info, predefined, profiler, screen,
self, sensors, traffic, urlfiltering, or user. A subcategory is an
attack type. Default Category
Subcategory of the log entry you are viewing. Default Sub Category
Level of severity associated with the attack detected. Every
attack has a default severity level although you can configure
a different one. Default Severity
The device that generated the log entry. Default Device
Enables you to comment about relates to the generated log
entry. To enter a comment, click in the cell and enter text. Default Comment
The application associated with this log. Default App
Service application name Default Application Name
Number of bytes that comprised the log data entering the
Log Viewer per session. No Bytes In
Number of bytes that comprised the log data being
transmitted from the Log Viewer per session. No Bytes Out
The sum of the number of bytes transmitted and received by
the Log Viewer. No Bytes Total
761 Copyright © 2010, Juniper Networks, Inc.
Chapter 19: Logging