Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 753 / 1026

Table 81: Server Detail Status
Description Name
Operating system running on server machine. OS
The server's machine processor type. Type
Percentage of the time the CPU was idle. CPU Idle
Percentage of CPU utilization that occurred while executing at the user
level. CPU User
Percentage of CPU utilization that occurred while executing at the system
level. CPU Kernel
Percentage of CPU utilization. CPU Usage
One minute load average. 1 Min Load
Five minute load average. 5 Min Load
Fifteen minute load average. 15 Min Load
Total amount (in megabytes or gigabytes) of memory. Total Mem
Amount (in megabytes or gigabytes) of used memory. Used Mem
Percentage of used memory. Mem Usage
Total amount (in megabytes or gigabytes) of swap space. Total Swap
Amount (in megabytes or gigabytes) of used swap space. Used Swap
Percentage of used swap space. Swap Usage
Viewing Process Status
From the Server Monitor, you can also view the status of all running server processes on
the GUI Server or Device Server. This view is useful for troubleshooting. If you are having
problems with the server, you can quickly identify if a specific process on the server is the
source of that problem.
To view process status, select Server Manager in the navigation tree, and then select
Server Monitor . Double-click the Server Monitor or click the node to expand the navigation
tree. You can also right-click the Server Monitor to open it in a new window. Click to
select a server to view the status of the processes running on it.
Figure 100 on page 704 shows process status for the Device Server.
703 Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Realtime Monitoring