manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

The Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 is an essential manual for those looking to effectively manage and secure their network. This comprehensive admininstration manual can be downloaded for free from manualshive.com, providing users with all the necessary information to successfully navigate the platform.

Share
Download
background image

Configuring Exempt Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491

Adding the Exempt Rulebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
Defining a Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492

Configuring Source and Destination Zones . . . . . . . . . . . . . . . . . . . . . . 492
Configuring Source and Destination Address Objects . . . . . . . . . . . . . . 492

Setting Attack Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Specifying VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Setting Target Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Entering Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Creating an Exempt Rule from the Log Viewer . . . . . . . . . . . . . . . . . . . . . . . 493

Configuring Backdoor Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494

Adding the Backdoor Rulebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495
Defining a Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495

Configuring Source and Destination Zones . . . . . . . . . . . . . . . . . . . . . . 495
Configuring Source and Destination Address Objects . . . . . . . . . . . . . . 495
Configuring Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496

Setting Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496
Setting Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496
Setting Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496

Setting Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
Setting an Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
Logging Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497

Setting Severity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
Specifying VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
Setting Target Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
Entering Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498

Configuring SYN Protector Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498

The TCP Handshake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498

SYN-Floods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498

Adding the SYN Protector Rulebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499
Defining a Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499

Configuring Source and Destination Address Objects . . . . . . . . . . . . . . 499
Configuring Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500

Setting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500
Setting Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500

Setting Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
Setting an Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
Logging Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501

Setting Severity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
Specifying VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
Setting Target Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
Entering Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502

Configuring Traffic Anomalies Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502

Detecting TCP and UDP Port Scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502

Example: Traffic Anomalies Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
Detecting Other Scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
Example: Traffic Anomalies Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
Example: Traffic Anomalies Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
Session Limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503

xxiii

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Canon Optura Pi Software Starter Manual preview
Optura Pi
Brand: Canon Pages: 90
Panasonic WJ-ND300 Administrator Console Operating Instructions Manual preview
WJ-ND300 Administrator Console
Brand: Panasonic Pages: 27
Barracuda Networks NG Network Access Client SP4 Administrator'S Manual preview
NG Network Access Client SP4
Brand: Barracuda Networks Pages: 268
Navman F-Series F20 User Manual preview
F-Series F20
Brand: Navman Pages: 10
Waves ABBEY ROAD THE KING'S MICROPHONES User Manual preview
ABBEY ROAD THE KING'S MICROPHONES
Brand: Waves Pages: 16
AT&T OneVision DEFINITY G3 Fault Management and integration User Manual preview
OneVision DEFINITY G3 Fault Management and integration
Brand: AT&T Pages: 153
F-SECURE MOBILE SECURITY 2010 FOR ANDROID Manual preview
MOBILE SECURITY 2010 FOR ANDROID
Brand: F-SECURE Pages: 20
Adobe 65007312 - Photoshop Lightroom User Manual preview
65007312 - Photoshop Lightroom
Brand: Adobe Pages: 184
Adobe FRAMEMAKER 6.0 Manual preview
FRAMEMAKER 6.0
Brand: Adobe Pages: 323
F-SECURE POLICY MANAGER 7.0 - Administrator'S Manual preview
POLICY MANAGER 7.0 -
Brand: F-SECURE Pages: 241
Adobe PHOTOSHOP CS 2.0 - SCRIPTING GUIDE Manual preview
PHOTOSHOP CS 2.0 - SCRIPTING GUIDE
Brand: Adobe Pages: 91
Brocade Communications Systems Brocade 8/12c Installation Manual preview
Brocade 8/12c
Brand: Brocade Communications Systems Pages: 47
Comdial GCA70-36 User Manual preview
GCA70-36
Brand: Comdial Pages: 32
BT Voyager Digital Media Player Installation & User Manual preview
Voyager Digital Media Player
Brand: BT Pages: 30
Denon DP-200USB Service Manual preview
DP-200USB
Brand: Denon Pages: 38
Intel Solid-State Drive Toolbox User Manual preview
Solid-State Drive Toolbox
Brand: Intel Pages: 32
LEI Extras MAPCREATE 7 - ADDENDUM Quick Start Manual preview
MAPCREATE 7 - ADDENDUM
Brand: LEI Extras Pages: 16
FieldServer FS-8700-84 Driver Manual preview
FS-8700-84
Brand: FieldServer Pages: 39

Brands by name

Popular brands

Load more brands