Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 197 / 1026

NSM displays the delta configuration results. One device succeeded and the other
device failed.
5.
Click Update .
6.
Close the Job Information window and select Job Manager from the main navigation
tree.
Only the device that passed delta configuration is updated.
Example: User Selects Two Devices to Update Without the Delta Option
1.
In the main navigation tree, select Device Manager > Devices .
2.
From the Device Manager launchpad, select Update Device to open the Update
Device(s) dialog box, listing all connected and managed devices.
3.
Select two devices you want to update.
4.
Deselect Run Summarize Delta Config (if selected), and then click Apply Changes .
NSM displays the updated device job results for both devices.
Example: User Selects Two Devices to Update with the Delta Option, But Has no
Admin Privileges
1.
In the main navigation tree, select Device Manager > Devices .
2.
From the Device Manager launchpad, select Update Device to open the Update
Device(s) dialog box, listing all connected and managed devices.
3.
Select two devices you want to update.
4.
Select Run Summarize Delta Config (if deselected), and then click Apply Changes .
NSM displays the delta configuration results for both devices.
Adding Vsys Devices
A Virtual System (vsys) is a virtual device that exists within a physical security device.
The vsys device functions as a completely separate security device. The physical device,
called the
root device , can contain multiple vsys devices. The following Juniper Networks
security devices can be root devices:
•
NetScreen-500
•
ISG1000
• ISG2000
• NetScreen-5200
•
NetScreen-5400
Placing the Root Device in a Global Domain or a Subdomain
Before you begin importing or modeling a root device, determine where you want to place
the vsys devices:
147 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Adding Devices