Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 86 / 1026

Figure 8: “Regular Expression” Search Mode Example
NOTE: The regular expression search mode supports all common regular
expressions. For more information about regular expressions, refer to a
dedicated resource, such as Mastering Regular Expressions, 2nd Edition, by
Jeffrey E. F. Friedl.
IP [I] Search Mode
Use to locate an IP address. For example, to locate the IP address
5.5.5.50
and
5.5.5.51
in address objects:
1.
In the main navigation tree, select Object Manager > Address Objects , then select
the Address Table tab.
2.
Select the first entry in the column IP/Domain Name, and then press the backslash
key (\) to display the search mode window.
3.
Enter I , and then enter 5.5.5.* . The UI automatically highlights the first match,
5.5.5.50
.
Click the down arrow key to highlight the next match,
5.5.5.51
.
When searching in a table, your search criteria are applied only to the selected column.
If you select a different column, such as Name, and perform the same search, the
results differ. Figure 9 on page 37 shows both search results.
NOTE: NSM Release 2009.1 allows you to search for an IP address with
its specific netmask.
Copyright © 2010, Juniper Networks, Inc. 36
Network and Security Manager Administration Guide