Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 270 / 1026

that aren’t available on every device. For example, wireless configuration information
is not relevant to devices that do not provide wireless functionality.
NOTE: If the template specifies a field that a device does not support, the
field does not appear in the Device dialog box and is not applied to the
device. No validation message appears. You can see these values by
checking the Report irrelevant template values check box.
If the template specifies a field that the device supports, but the value is
outside the permitted range for the device, a validation message appears
in the Device dialog box.
•
Report conflicts with other templates —Reports any values that conflict between the
selected templates and existing templates assigned to the device. If undesired conflicts
exist, you might need to modify the templates to get the configuration you want.
•
Validate —Checks that the configured device (after any changes) is a valid configuration
and reports any errors.
Template Operations Box Recommended Workflow
The Template Operations dialog box can be used in many ways. This section describes
one recommended workflow.
Step 1: Look at the Effect of Planned Changes Before Making Them
1.
From the Device Manager launchpad, click the Template Operations icon, and select
a device family from the Select OS Name list.
2.
Select one or more devices to validate templates against.
Example: 5gt, 5gt-12, 5gt-13, 500, 520, 1000
3.
Select the Edit icon under the Edit Templates header to display a list of templates.
4.
Select one or more templates to validate against the devices.
Example: VPN, DNS, Route-Basic, Zone-Basic, admin-1
5.
Click OK .
6.
If you have selected more than one template, use the up and down arrows to order
the templates. Templates higher in the list will be assigned first. Templates lower in
the list will be assigned later. Later templates can override the settings of earlier
templates.
7.
Select Don’t change templates .
8.
If you want, you can select one or more of the following validation and reporting
options:
Copyright © 2010, Juniper Networks, Inc. 220
Network and Security Manager Administration Guide