Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 699 / 1026

See “Detect and Resolve Configuration Conflicts” on page 648.
Edit a Port Template
To edit a customized port template’s CoS parameters:
1.
Select a customized port template from the list, click the Customize Port Template
button and choose
Edit Port Template
. The Confirm Edit Port Template screen is
displayed with a list of devices on which the template has been applied. Click
OK
if
you want to proceed with the modification, else click
Cancel
.
2.
To modify the default description, type a description in the
Description
field.
3.
To modify the default scheduler map name, type a name in the
Scheduler Map
Name
field.
4.
To edit scheduler settings, click
Edit Scheduler
. The Edit Scheduler screen is displayed.
Specify the following:
• Scheduler name
• Transmit Rate—Select one: Unconfigured if you do not want to configure the
parameter, Percent and enter a value, or Remainder to assign the remaining
bandwidth available.
• Buffer Size—Transmit Rate—Select one: Unconfigured if you do not want to configure
the parameter, Percent and enter a value, or Remainder to assign the remaining
buffer available.
• Priority—Select a value from the list.
Click
OK
to save the settings or
Cancel
to cancel all modifications.
5.
Click
Save
to create the customized port template.
See “Detect and Resolve Configuration Conflicts” on page 648.
649 Copyright © 2010, Juniper Networks, Inc.
Chapter 15: Role-based Port Templates