Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 327 / 1026

Figure 72: Adding a Shared Binary Data Object
4.
Link the shared object to the corresponding node in the device configuration tree:
a.
In the Device Manager, double-click the Secure Access or Infranet Controller device
to open the device editor, and then select the
Configuration tab.
b.
Navigate to the node in the configuration where you want to load the binary file.
For example, to load an ESAP package, expand Authentication and then select
Endpoint Security . In the Host Checker tab, select Endpoint Security Assessment
Plug-Ins , and then click the Add icon.
277 Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Managing Devices