Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 311 / 1026

for each device. When the job has completed, successfully or unsuccessfully, this field
displays 100 percent.
• Device Name—The name of the device on which the job is executed.
•
State Description—The current state of the job.
•
Completion Level—The percentage of a job that has executed successfully.
• Output—Displays the content of the update, including commands that have been
interpreted from the NSM data model into device-specific commands, error messages,
and existing commands deleted from the device. The Output Display Region displays
all errors, warnings, device verification output, and device state information associated
with the job.
NOTE: If the Job Information dialog box might contain Chinese, Japanese, or
Korean characters, you must uncheck the Fixed Font box to display them.
NOTE: Job Manager configuration summaries and job information details do
not display passwords in the list of CLI commands for administrators that
do not have the assigned activity “View Device Passwords”. By default, only
the super administrator has this assigned activity.
Device States During Update
During an update, the managed device changes device state. You can view the current
device state in real time in the State Description field of the Job Information dialog box.
Table 29 on page 261 lists the states that a device can have.
Table 29: Device States During Update
Description Device State
No update activity has occurred on the device. None
NSM is sending the update image to the flash memory of the
device. Loading in Progress
Device is accepting the parameters from the update
configuration that has been sent to the device flash memory. Pending
The parameters that have been set in the NSM configuration
are being changed to corresponding device-specific CLI
commands that execute on the device. Converting Data Model to
Device Data Model
Device has successfully been updated with the modeled
configuration. Completion
Device has not been successfully updated with the modeled
configuration. The Output pane of the Job Manager dialog box
displays error messages and error codes. Failed
261 Copyright © 2010, Juniper Networks, Inc.
Chapter 6: Updating Devices