manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

The Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 is an essential manual for those looking to effectively manage and secure their network. This comprehensive admininstration manual can be downloaded for free from manualshive.com, providing users with all the necessary information to successfully navigate the platform.

Share
Download
background image

Table 24: CSV File Information for Devices with Dynamic IP
Addresses

(continued)

Acceptable Values

Required

Type

Field Name

With OS name ScreenOS:

ns5GT-Combined,
ns5GT-Dual-Untrust,
ns5GT-Trust-Untrust,
ns5GT-Dual-DMZ, ns5GT-Extended,
ns5GT-Dmz-Dual-Untrust,
ns5GT-Home-Work,
ns5GTadsl-Home-Work,
ns5GTadsl-Trust-Untrust,
ns5GTadsl-Extended, ns5XP,
ns5GTadslwlan-Extended,
ns5GTadslwlan-Home-Work,
ns5Gtadslwlan-Trust-Untrust,
ns5Gtwlan-Extended,
ns5Gtwlan-Dmz-Dual-Untrust,
ns5Gtwlan-Combined,
ns5Gtwlan-Home-Work,
ns5Gtwlan-Dual-Untrust,
ns5Gtwlan-Trust-Untrust,
ns5Gtwlan-Dual-Dmz,
ns5XT-Combined,
ns5XT-Dual-Untrust,
ns5XT-Trust-Untrust,
ns5XT-Home-Work, ns-25, ns-50,
ns204, ns208, ns500, ns5200,
ns5400, nsHSC-Home-Work,
nsHSC-Trust-Untrust, nsISG1000,
nsISG2000, SSG5-ISDN, SSG5–SB,
SSG5-ISDN-WLAN, SSG5-Serial,
SSG5-Serial-WLAN, SSG5-v92,
SSG5-v92-WLAN, SSG-20,
SSG-20-WLAN, SSG-140, SSG-320,
SSG-320M, SSG-350, SSG-350M,
SSG-520, SSG-520M, SSG-550,
SSG-550M

With OS name junos:

m7i, m10i, m120, m320, m40e, m7i,
m320, mx240, mx480, mx960

yes

String

Platform

173

Copyright © 2010, Juniper Networks, Inc.

Chapter 4: Adding Devices

Summary of Contents for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Samsung 4116 - SCX B/W Laser Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 14
Samsung 2252W - Printer - B/W Manual preview
2252W - Printer - B/W
Brand: Samsung Pages: 10
Cabletron Systems SmartSwitch 1800 User Manual preview
SmartSwitch 1800
Brand: Cabletron Systems Pages: 48
Navitar 12X Zoom Instruction Manual preview
12X Zoom
Brand: Navitar Pages: 23
Novell ZENworks 7.2 Linux Management Manual preview
ZENworks 7.2 Linux Management
Brand: Novell Pages: 10
Avaya CPSEE_TSP500 User Manual preview
CPSEE_TSP500
Brand: Avaya Pages: 216
Philips SA2SONGBRD/00 User Manual preview
SA2SONGBRD/00
Brand: Philips Pages: 18
Seagate ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive Specifications preview
ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive
Brand: Seagate Pages: 2
Red Hat CERTIFICATE SYSTEM 7.2 - AGENT GUIDE Manual preview
CERTIFICATE SYSTEM 7.2 - AGENT GUIDE
Brand: Red Hat Pages: 73
Red Hat ENTERPRISE LINUX 3 - SECURITY GUIDE Manual preview
ENTERPRISE LINUX 3 - SECURITY GUIDE
Brand: Red Hat Pages: 410
A&D WinCT-Plus Instruction Manual preview
WinCT-Plus
Brand: A&D Pages: 36
Tech Source RAPTOR 2500T-DL - RAPTOR OPENWINDOWS FOR SOLARIS INSTALLATION AND Brochure preview
RAPTOR 2500T-DL - RAPTOR OPENWINDOWS FOR SOLARIS INSTALLATION AND
Brand: Tech Source Pages: 2
GRASS VALLEY KAYAK HD Installation And Service Manual preview
KAYAK HD
Brand: GRASS VALLEY Pages: 216
MACROMEDIA DREAMWEAVER 8-DREAMWEAVER API Reference preview
DREAMWEAVER 8-DREAMWEAVER API
Brand: MACROMEDIA Pages: 628
Vector PC-Duo Manual preview
PC-Duo
Brand: Vector Pages: 148
TC Electronic TC Chorus-Delay Manual preview
TC Chorus-Delay
Brand: TC Electronic Pages: 7
Garmin Nuvi 755T - Automotive GPS Receiver Owner'S Manual Supplement preview
Nuvi 755T - Automotive GPS Receiver
Brand: Garmin Pages: 61
ACRONIS Backup & Recovery Online Stand-alone User Manual preview
Backup & Recovery Online Stand-alone
Brand: ACRONIS Pages: 28

Brands by name

Popular brands

Load more brands