Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 869 / 1026

Running Reports Using the guiSvrCLI.sh Utility
The
guiSvrCli.sh
utility is located in the /usr/netscreen/GuiSvr/utils directory on the GUI
Server. Use the following syntax to generate reports:
export NSMUSER=global/<user name>; export NSMPASSWD=<password>;
/usr/netscreen/GuiSvr/utils/guiSvrCli.sh --generate-reports --report global:<Report Folder>:"\”
report name\” " --script ftp.sh
The export NSMUSER and NSMPASSWORD statements set the username and password
used to generate the report. This user must have appropriate rights on the NSM
management system. You need to create a specific account for this purpose.
You can generate any of the predefined reports by specifying "system" in the <Report
Folder> field, or any user-created report other than those defined in "My Reports" by
specifying "shared" in the <Report Folder> field. You must reference the report with the
full domain path, using a colon to separate domain elements and the report folder.
The script parameter refers to the script, located in the /usr/netscreen/GuiSvr/var/scripts
directory, that is run on completion of the report generation.
Creating and Editing Action Scripts
NOTE: Sample scripts enabling you to e-mail and FTP the report results are
available in
/usr/netscreen/GuiSvr/lib/scripts
for your convenience. To use
these scripts, we recommend that you first copy them to
/usr/netscreen/GuiSvr/var/scripts , and then change the permissions on the
scripts so that they are both writable and executable. You can then customize
the scripts to your needs.
Transferring Reports to an FTP Server
The
ftp.sh
script is used to transfer the report to an FTP server. The following portion of
the script needs to be edited:
########################################################################
# CONFIGURABLE PARAMETERS
########################################################################
# Remote hostname or IP address
remote_host="localhost"
# login for ftp account
userid="ftp"
# password for ftp account
passwd="ftp"
# pick reports from this directory prefix
local_dir_prefix="/usr/netscreen/GuiSvr/var"
E-mailing Reports
To e-mail reports, you must configure two scripts:
• email.sh —This script is called in the guiSvrCli.sh utility and defines how the reports are
to be included in the e-mail message
• Email.pl —This script is called by email.sh and configures the actual SMTP parameters.
819 Copyright © 2010, Juniper Networks, Inc.
Chapter 20: Reporting