Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 66 / 1026

Table 7: Supported Security Devices (continued)
Firmware Versions Supported Security Device
IDP 4.0, 4.1, 5.0, 5.1 Juniper Networks IDP 600F
IDP 4.1, 5.0, 5.1 Juniper Networks IDP800
IDP 4.0, 4.1 Juniper Networks IDP 1000
IDP 4.0, 4.1, 5.0, 5.1 Juniper Networks IDP 1100C
IDP 4.0, 4.1, 5.0, 5.1 Juniper Networks IDP1100F
IDP 4.2, 5.0, 5.1 Juniper Networks IDP8200
NOTE: NSM supports the following ScreenOS releases: 5.0r11, 5.1r4, 5.2r3,
5.3r10, 5.4r11, 6.0r2, 6.1r4, 6.2, and 6.3.
NSM supports the IDP Release 4.0, 4.1, 4.2, and 5.0.
NOTE: Customers of NetScreen 5GT must upgrade directly from 5.4 to 6.2
as there are no intermediate releases for it. If you need to go through an
intermediate non-certified release when upgrading from one certified release
to the next, you must plan for a service outage and a longer upgrade time.
SSG-5-SB replaces NetScreen 5GT. SSG-5-SB is a 10-user variant of SSG-5,
similar to the existing 10-user variant of NS-5GT.
Devices Running Junos OS
Devices running Junos OS and managed by NSM are listed in the following sections:
•
Juniper Networks J Series Services Routers and SRX Series Services
Gateways on page 16
• Juniper Networks M Series Multiservice Edge Routers and MX Series Ethernet Services
Routers on page 18
•
Juniper Networks EX Series Ethernet Switches on page 19
NOTE: NSM only supports the domestic version of the Junos OS and not the
export version.
Juniper Networks J Series Services Routers and SRX Series Services Gateways
These routers and gateways offer not only a rich set of routing protocols and interfaces,
but also firewall and IPsec virtual private network capabilities, providing high levels of
security.
Copyright © 2010, Juniper Networks, Inc. 16
Network and Security Manager Administration Guide