Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 739 / 1026

Table 67: IDP Device Detail Status Items (continued)
Description Item
Percentage of used swap space. Swap Usage
Viewing IDP Process Status
For IDP sensors, use the Process Status tab to view information on various processes
running on the sensor.
Table 68 on page 689 lists and describes the information that you can view for an IDP
sensor through the Process Status:
Table 68: IDP Sensor Process Status Items
Description Item
Name of the process running on the sensor. Process Name
Amount (in megabytes) of memory used. Total Mem Usage
Amount of memory (in kilobytes) a process currently has in physical memory
(not in swap). Phys Mem Usage
Percentage of CPU used. CPU Usage
Viewing IDP Device Statistics
If a sensor is running, you can also access the Statistics view to access traffic and other
system-related information on the device. To view statistics on a particular sensor,
right-click the sensor in either the
Device Monitor or the Device Manager and select View
Statistics . The Device Statistics Summary appears in a new window.
NOTE: The information in the Device Statistics window appears slightly
different for firewall/VPN devices and IDP sensors.
IDP Device Statistics Summary
The Device Statistics Summary displays the following details:
• Details describing the sensor, for example, firmware version and mode.
• Packet and flow information
Table 69 on page 689 details additional information you can view from the Device Statistics
Summary for IDP sensors.
Table 69: Device Statistics Summary (for IDP Sensors)
Description Item
IDP firmware version running on the sensor. OS Version
689 Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Realtime Monitoring