Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 173 / 1026

1.
From the domain menu, select the domain in which you want to import the device.
2.
In Device Manager, select Devices .
3.
Click the Add icon and select Device to open the Add Device wizard.
4.
Select Device is Not Reachable , and then click Next .
5.
In the Specify Name, Color, OS Name, Version, and Platform screen:
• Enter a name and select a color to represent the device in the UI.
• From the OS Name list, select SA for a Secure Access device, or IC for an Infranet
Controller device,
• From the Platform list, select the device platform name.
• From the Managed OS Version list, select the version of the operating system that
runs on the device.
• Select the Device Server Connection Parameters. Use the default settings to
configure the device to connect to the NSM Device Server IP address and port. Use
a MIP to configure the device to connect to the NSM Device Server through a mapped
IP address and port.
•
Click Next .
6.
Perform the following tasks on the Specify Device Admin User Name/Password and
One Time Password screen:
a. Make a note of the unique external ID. The device administrator will need it to
configure connectivity with NSM. The wizard automatically enters this value for
the device. This ID number represents the device within the management system.
b. Specify the administrator user name and password for the SSH connection. This
name and password must match the name and password already configured on
the device.
c. Specify the First Connection One Time Password (OTP) that authenticates the
device. Make a note of this password. The device administrator will need it to
configure the connectivity with NSM.
NOTE: All passwords handled by NSM are case-sensitive.
d. Click Finish to complete the Add Device wizard and include the new device in the
Device Manager list.
7.
Verify in the Device List tab that the new device is visible and has the connection status
“Never connected.”
8.
Convey the unique external ID and the one-time password to the device manager.
123 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Adding Devices