Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 212 / 1026

Figure 34: Adding a J Series Cluster
3.
Click OK .
The new cluster appears in the Device Manager.
Modeling the Cluster Members
1.
Right-click on the cluster icon and select New > Cluster Member from the list.
2.
In the New Cluster Member dialog box, enter a name and color for the cluster member,
and select the
Model Device radio button.
3.
Check the Keep Adding Other Cluster Members box and leave the Member ID as 0.
Figure 35: Adding the First Member to a J Series Cluster
4.
Click Next to finish adding the first member.
Copyright © 2010, Juniper Networks, Inc. 162
Network and Security Manager Administration Guide