manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

The Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 is an essential manual for those looking to effectively manage and secure their network. This comprehensive admininstration manual can be downloaded for free from manualshive.com, providing users with all the necessary information to successfully navigate the platform.

Share
Download
background image

About Topology Manager Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 642

Default Credentials Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 642
Refresh Interval Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 642
Preferred Subnets Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 642

Adding Discovered Devices to NSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 642

Chapter 15

Role-based Port Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645

Using Role-Based Port Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645

Managing Port Template Associations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 646
Apply or Edit a Port Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 646
Detect and Resolve Configuration Conflicts . . . . . . . . . . . . . . . . . . . . . . . . . 648
Clone a Port Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 648
Edit a Port Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 649

Chapter 16

Unified Access Control Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 651

Overview of the Unified Access Control (UAC) Manager Views . . . . . . . . . . . . . . 651

The Infranet Controller View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 651
The Enforcement Point View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 652

Associating Enforcement Points with an Infranet Controller in the UAC

Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 652

Disassociating Enforcement Points from an Infranet Controller in the UAC

Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 653

Resolving Configuration Conflicts with the Infranet Controller in the UAC

Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 653

Enabling 802.1X on Enforcement Point Ports in the UAC Manager . . . . . . . . . . . 654
Disabling 802.1X on Enforcement Point Ports in the UAC Manager . . . . . . . . . . 655
Resolving Configuration Conflicts Between Devices and 802.1X Ports in the UAC

Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655

Part 4

Monitoring

Chapter 17

Realtime Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 659

About the Realtime Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 659

Realtime Monitor Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660

Monitoring Managed Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660

Viewing Device Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660
Device Polling Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 663
Viewing Device Monitor Alarm Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 664
Setting the Polling Interval For Device Alarm Status . . . . . . . . . . . . . . . . . . 664
Viewing Additional Device Detail and Statistics . . . . . . . . . . . . . . . . . . . . . . 665

Viewing Device Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 665
Viewing Device Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 666

Monitoring IDP Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 686

Viewing IDP Device Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 686
Viewing IDP Device Detail and Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 687

Viewing IDP Device Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 688
Viewing IDP Process Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 689
Viewing IDP Device Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 689

xxix

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Canon PowerShot A530 Software User'S Manual preview
PowerShot A530
Brand: Canon Pages: 153
Canon PowerShot A420 Software User'S Manual preview
PowerShot A420
Brand: Canon Pages: 132
Canon PowerShot A460 Using Manual preview
PowerShot A460
Brand: Canon Pages: 135
Canon MultiPASS C50 Software User'S Manual preview
MultiPASS C50
Brand: Canon Pages: 198
Canon PowerShot A530 Software Starter Manual preview
PowerShot A530
Brand: Canon Pages: 98
Generic Media gMovie v1.4 Operating Instructions Manual preview
gMovie v1.4
Brand: Generic Media Pages: 17
ZixCorp PocketScriptTM User Manual preview
PocketScriptTM
Brand: ZixCorp Pages: 44
MACROMEDIA DRUMBEAT 2000 ECOMMERCE EDITION User Manual preview
DRUMBEAT 2000 ECOMMERCE EDITION
Brand: MACROMEDIA Pages: 238
Alcatel neopost UK Manual preview
neopost UK
Brand: Alcatel Pages: 4
Better Light ViewFinder 7 User Manual preview
ViewFinder 7
Brand: Better Light Pages: 99
Red Hat APPLICATION STACK 1.4 RELEASE Release Note preview
APPLICATION STACK 1.4 RELEASE
Brand: Red Hat Pages: 22
Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - FOR DELL SERVERS V1.0 Manual preview
ALTIRIS DEPLOYMENT SOLUTION 7.1 - FOR DELL SERVERS V1.0
Brand: Symantec Pages: 47
FieldServer FS-8700-23 Driver Manual preview
FS-8700-23
Brand: FieldServer Pages: 11
Autodesk AUTOCAD ARCHITECTURE Brochure preview
AUTOCAD ARCHITECTURE
Brand: Autodesk Pages: 4
MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual preview
FIREWORKS 8-USING FIREWORKS
Brand: MACROMEDIA Pages: 472
Native Instruments Scarbee MM-Bass User Manual preview
Scarbee MM-Bass
Brand: Native Instruments Pages: 39
MACROMEDIA BREEZE PRESENTER Manual preview
BREEZE PRESENTER
Brand: MACROMEDIA Pages: 106
FARONICS ANTI-EXECUTABLE Getting Started Manual preview
ANTI-EXECUTABLE
Brand: FARONICS Pages: 2

Brands by name

Popular brands

Load more brands