Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 242 / 1026

The Configuration tab contains device data that resides on the device itself when active.
This information can be imported from the device, or is modeled information waiting to
be pushed to the device by an Update Device directive. This information varies by device
family and typically includes device-specific feature settings such as those for interfaces,
routing, and authentication.
For ScreenOS or IDP devices, access to general device information and device feature
configuration data is through the same tree. The top branch of that tree (the Info branch)
contains similar data to that displayed through the Device Info tab for the other device
families. Figure 41 on page 192 shows an example.
Figure 41: ScreenOS and IDP Device Configuration Information
Validation and Data Origination Icons
The device editor might display some of the icons shown in Table 26 on page 193. These
icons provide validation status or data origination information about the displayed data
items. Data validation icons include those for errors and warnings. Data origination icons
indicate whether a data item was inherited from a template or configuration group, or
whether an inherited value has been overridden in the device edit dialog box. For details
about using device templates, see “Using Device Templates” on page 198. For information
about configuration groups, see “Using Configuration Groups” on page 223.
Copyright © 2010, Juniper Networks, Inc. 192
Network and Security Manager Administration Guide