Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 735 / 1026

Custom Troubleshoot Commands
option under the
Tools
menu in the
Device Manager
window.
To troubleshoot a device:
1.
From the Device Manager , right-click on any device and select Troubleshoot . The
Troubleshoot Device window appears.
2.
Select the appropriate command from the list of Predefined Commands in the Shortcuts
window. The command appears in the Command field.
3.
Click on the Execute Command button. The status of the command appears in the
field below. All commands that you execute appear in the History window.
You can use the Add to Shortcut or Remove from Shortcut buttons in the Troubleshoot
Device
window to create a list of CLI command shortcuts.
NOTE: Commands from NSM originate from the UI client to the security
device. If you intend to issue
get
commands from NSM, you must plan and
implement security policy rules in your network accordingly.
Viewing High Availability (HA) Statistics (if applicable)
If you have configured security devices to be highly available, you can view NSRP-related
statistics on the device by accessing the HA Statistics view. Table 65 on page 685 describes
all of the information that is available from the HA Statistics view:
Table 65: HA Statistics View
Description Item
The group ID that is associated with the VSD (or RTO). VSD Group ID
The number of units associated with the VSD (or RTO). Number of Units
The number of times a security device changes operational states. State Change Counter
The transient state of a VSD (or RTO) group member while it was in
the process of joining the VSD (or RTO) group. Init Counter
The number of master security devices. Master
The number of primary backup security devices. Primary BackUp
The total number of backup security devices. BackUp
An administrator purposefully assigned a security device so that it
cannot participate in selecting a new master security device. Ineligible
A VSD (or RTO) group security device has an internal problem. InOperable
The number of conflicts that occurred on the master security device. Master Conflict
685 Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Realtime Monitoring