manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

The Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 is an essential manual for those looking to effectively manage and secure their network. This comprehensive admininstration manual can be downloaded for free from manualshive.com, providing users with all the necessary information to successfully navigate the platform.

Share
Download
background image

Sharing Your Custom Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824
Modifying Report Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824
Configuring Report Processing Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 824
Saving Your Report Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824

Log Viewer Integration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824

Viewing Logs From Report Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825
Generating Quick Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825

Using Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825

Example: Using Administrative Reports to Track Incidents . . . . . . . . . . . . . 826
Example: Using Administrative Reports to Optimize Rulebases . . . . . . . . . . 827
Example: Using EX Switch Reports to Track Configuration Changes . . . . . . 828
Example: Using SSL/VPN Reports to Track Authentication Failures . . . . . . 828
Example: Using Screen Reports to Identify Attack Trends . . . . . . . . . . . . . . 829
Example: Using DI Reports to Detect Application Attacks . . . . . . . . . . . . . . 829

Using the Watch List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 829

Part 5

Appendixes

Appendix A

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 833

Network and Security Manager (NSM) Term Definitions . . . . . . . . . . . . . . . . . . . 833

Appendix B

Unmanaged ScreenOS Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 859

Appendix C

SurfControl Web Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 861

Appendix D

Common Criteria EAL2 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869

Guidance for Intended Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869

Guidance for Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869
Guidance for Physical Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869

Appendix E

Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 871

Screen Alarm Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 871
Alarm Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 873
Deep Inspection Alarm Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874
Configuration Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 949
Information Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 951
Self Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 953
Traffic Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 953
GTP Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 954

Part 6

Index

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 957

xxxv

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Campbell PC208 Instruction Manual preview
PC208
Brand: Campbell Pages: 133
MACROMEDIA ClusterCATS Use Manual preview
ClusterCATS
Brand: MACROMEDIA Pages: 156
Valgrind BBV Quick Start Manual preview
BBV
Brand: Valgrind Pages: 319
Art & Logic DMF-560TX Brochure preview
DMF-560TX
Brand: Art & Logic Pages: 2
AMX Modero NXD-1000Vi Datasheet preview
Modero NXD-1000Vi
Brand: AMX Pages: 2
Measurement Computing 374318A-01 User Manual preview
374318A-01
Brand: Measurement Computing Pages: 109
GRASS VALLEY Concerto Instruction Manual preview
Concerto
Brand: GRASS VALLEY Pages: 174
Cabletron Systems CBU-NM User Manual preview
CBU-NM
Brand: Cabletron Systems Pages: 108
Oce XMPie User Manual preview
XMPie
Brand: Oce Pages: 22
IBM High Performance Storage System HPSS Installation Manual preview
High Performance Storage System HPSS
Brand: IBM Pages: 311
KapLogic Aegis2.2x Installation Manual preview
Aegis2.2x
Brand: KapLogic Pages: 24
IBM VIAVOICE 10-STANDARD EDITION User Manual preview
VIAVOICE 10-STANDARD EDITION
Brand: IBM Pages: 124
Epson Stylus pro 3800 portrait edition Specifications preview
Stylus pro 3800 portrait edition
Brand: Epson Pages: 12
Epson Stylus Pro 5500 Specifications preview
Stylus Pro 5500
Brand: Epson Pages: 2
Epson Stylus Pro 4800 Portrait Edition Brochure & Specs preview
Stylus Pro 4800 Portrait Edition
Brand: Epson Pages: 6
Epson Stylus Pro 4800 Portrait Edition Reference Manual preview
Stylus Pro 4800 Portrait Edition
Brand: Epson Pages: 396
Epson Stylus Pro 7600 Manual preview
Stylus Pro 7600
Brand: Epson Pages: 5
Epson VS330 Quick Reference Manual preview
VS330
Brand: Epson Pages: 4

Brands by name

Popular brands

Load more brands