Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 441 / 1026

Example: Creating a Custom Service and Group
In this example, you create a custom service object to represent the Ident service and a
custom service group that includes this service.
To create the custom Ident service:
1.
In the main navigation tree, select Object Manager > Service Objects > Custom
Service Objects .
2.
In the main display area, click the Add icon and select Service . The New Service dialog
box appears.
3.
Configure the following:
a. For Name, enter Ident
b. For Timeout, select Default .
c. For Color, select blue .
d. Enter a comment, if desired.
4.
In the Non-ICMP Services Entries area, click the Add icon and select TCP. The New
Service Entry dialog box appears. Configure the following:
a. For Source Port, select Range .
b. For Source Port Range, enter 0 to 65535.
c. For Destination Port, select Specific .
d. For Specific Port, enter 113 .
5.
Click OK to save the new service entry, then click OK again to save the new service
object.
6.
In the main display area, click the Add icon and select Group . The New Service Group
dialog box appears. Configure the following:
a. For Name, enter Remote Mail .
b. For Color, select pink .
c. Enter a comment, if desired.
d. In the Non-members area, select the following services (press and hold Ctrl to select
multiple services):
391 Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Configuring Objects