Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 573 / 1026

Using a Filter to Search for a Policy Version
This section explains how to use a filter to search for a policy version.
To use a filter to search for a version:
1.
In the NSM GUI, right-click on a policy.
2.
In the popup menu, select View Versions .
The Version History window appears.
3.
In the window, select the version and click Filter/Search .
The Version Filter Definition dialog box appears.
4.
In the dialog box, fill in the filter criteria:
•
Comment Contains — Enter a comment on which to filter the version search.
• Created After — Use the up and down arrows to select the date and time.
•
Created Before — Use the up and down arrows to select the date and time
5.
Press OK .
The Version History now displays existing versions that meet the criteria.
6.
When you are finished, press Close .
Editing Comments for an Existing Policy Version
This section explains how to edit comments for an existing policy version.
To edit comments for an existing version
1.
In the NSM GUI, right-click on a policy.
2.
In the popup menu, select View Versions .
The Version History window appears.
3.
In the Version History window, select an existing version and press Edit Comments .
The Database Version dialog box displays the Version Comments.
4.
Change the comments and click OK .
The Version History window displays the new comments.
5.
When you are finished, click Close .
Comparing Two Versions
This section explains how to compare two existing versions.
When you import a device with assigned policy objects, and there is a difference between
the existing and imported objects, NSM creates a new policy object that has two versions.
The older version being the original and the newer version being the modified object. You
can then use the compare versions tool to find out the changes to the object.
523 Copyright © 2010, Juniper Networks, Inc.
Chapter 9: Configuring Security Policies